Vca Setup - Interlogix TruVision 21 User Manual

To set up a camera for a restricted access view:
1. From the menu toolbar, click
2. Check which IP camera or cameras you want to have restricted access and click
Apply.
3. Click Exit to return to live view.

VCA Setup

The configuration of each individual VCA event is done in the camera browser. Within
the recorder you are able to link actions to a VCA alarm from IP cameras that support
this feature.
To setup VCA alarm actions:
1. From the menu toolbar, click
2. Select the camera for which to set up the VCA alarm.
3. Check the Enable VCA Alarm
4. Click the Actions button to define which actions are required with the VCA events
from each camera.
5. Click Apply to save the settings and then click
Note: VCA events do not trigger recordings; they are marked in the recorder and allow
you to easily find the assisted video. It is recommended to use continuous recording or
to enable motion detection in combination with VCA events.
TruVision NVR 21 (SP) User Manual
Camera Setup > Restricted Access
Camera Setup > VCA.
box to enable the feature.
Exit
Chapter 10: Camera setup
Camera.
to return to live view.
67