Alarm Audio; Buzzer Settings; Alarm Notification Types - Interlogix TruVision 21 User Manual

Chapter 13: Alarm and event setup
- Or -
Press the Alarm

Alarm Audio

The Alarm Audio menu allows you to review and edit recorded audio files.

Buzzer settings

When an alarm is triggered by the system or a camera, the recorder can be set up to
respond with a warning buzzer. The buzzer time is the time that it takes for the recorder
to time-out the buzzer when a continuous alarm occurs. For example, when a physical
alarm input is continuously triggered, the buzzer will time out after the time specified.
Select Alarm & Event Setup > Buzzer Settings
system and camera alarms. Select Mute, 5 s, 10 s, 20 s, 30 s, 60 s, 120 s, 240 s, or
Constant. Default is mute.

Alarm notification types

When setting up the rules for alarm detection, you can specify how you want the
recorder to notify you about an alarm or event. You can select more than one
notification type.
Not all notifications types are available for all types of alarms.
You can quickly check the system status by looking at the status LEDs on the front
panel.
The alarm notification types are:
• Display Event Icon: When an alarm is triggered in the system, an icon appears on
screen to also alert you. See "Status information" on page 27 for further information.
• Event Hint Settings: Click on the settings button to choose your Hint Settings.
• Event Priority: Select the Event Priority from Text In < Motion or Text In > Motion.
• Notification Type: Select HDD Full, HDD Error, Network Disconnected, Duplicate
IP Address Found, Illegal Login, Abnormal Record, and PoE Power Overload.
• Enable Alarm Audio: Triggers an audible beep when a notification or alarm is
detected by the system or a camera.
• Notify Alarm Host: Sends a signal to TruVision Navigator or other software
applications when an alarm or notification is detected.
92
button on the front panel or remote control. The alarm is silenced.
and select a buzzer time limit for the
TruVision NVR 21 (SP) User Manual