Table of Contents
Advertisement
• The parameter Magnitude determines the size and direction of the spiral.
A value of –100.00 represents the maximum movement in the
counterclockwise direction, and a value of +100.00 represents the maximum
movement in the clockwise direction.
• The parameter Wave Speed determines the speed of the lateral waves.
A value of –100.00 represents the maximum speed to the left, and a value of
+100.00 represents the maximum speed to the right.
Wipe Snapshots
You can snapshot and save a wipe pattern together with the current settings of
its modifiers and pattern limit in a dedicated register for recall when required.
There are 10 wipe snapshot registers on each M/E bank and the PGM/PST
bank.
Use the Flexi Pad control block in each switcher bank or the Menu control
block to save and recall wipe snapshots. (For details, see "Wipe Snapshots"
(page 406).)
For simple transitions (see page 331), there are eight wipe snapshot registers
on each M/E bank and the PGM/PST bank.
Wipe Modify Clear
By a simple operation, you can return the wipe state to that set in initial status.
For details of the menu operation to return the wipe state to that set in initial
status, see "Returning to default state in function groupings" (page 284).
66
Wipes
Advertisement
Table of Contents
