Load Program (Sp9-40 To -50/ Sp9-3) - Ricoh C249 Service Manual

SERVICE PROGRAM MODE OVERVIEW
4.2.3 LOAD PROGRAM (SP9-40 TO –50/ SP9-3)
This procedure is for upgrading the system firmware for the controller and the
network interface board.

CAUTION
Do not turn off the machine while downloading the firmware.
For model #C249
For models #C239/C244
1. Before downloading new firmware, print the configuration page.
[User Tools] – [6 Online Paramet's] – [3 List/Test Print] – [System Print].
(For model #C249)
[User Tools] – [7 Set O/L Paramet's] – [3 List/Test Print] – [System Print].
(For models #C239/C244) then check the current version.
2. Prepare an IC card that contains the required firmware.
C624
[B]
[A]
[B]
C624S004.WMF
C624S009.WMF
26
[A]
SM