Main Menu No.8: System Test - Ricoh C249 Service Manual

MAIN MENU NO.8: SYSTEM TEST

5.9 MAIN MENU NO.8: SYSTEM TEST
5.9.1 SP TABLE
No.
8-1 Download main firmware
8-2 Upload main firmware
Test patterns
8-10
⇒
8-18 Temporary Security
8-19 Free run - ADF
8-20 Free run - scanner
8-21 Paper feed at 15rpm
8-22 Free run - Paper feed (15 rpm)
8-23 30->45->60 rpm print mode
8-30 All indicators on the panel
8-31 Not used
5.9.2 SP8-1: DOWNLOAD MAIN FIRMWARE
Upgrades the main firmware using a flash memory card.
1. Before downloading new firmware, check the current version with SP1-73
( 5.2.1).
2. Prepare a flash memory card with the latest firmware.
3. Turn off the main switch and disconnect the power cord.
4. Remove the rear card cover.
5. Plug the flash memory card into the connector on the MPU.
6. Connect the power cord, then turn on the main switch.
7. Access SP8-1 and press the OK key. Press the "Enter(#)" key.
8. Press the Enter key. (It takes about 2.0 minutes to complete.)
9. Check that the "Completed" is displayed.
10. Turn off the main switch, and remove the flash memory card.
C249
Menu Items
5-26
Default Settings
- Start with # key (
- Start with # key (
6
Pattern 6 (1-9) A4 start
with # ( 5.9.4)
Off Off/On ( 5.9.7)
100% 50 to 200%
100% 50 to 200%
Off Off/On( 5.9.5)
Off Off/On( 5.9.6)
Off Off/On
- Active when start press
Off Off/On
Rev. 10/2004
5.9.2)
5.9.3)
SM