Sp8-18: Temporary Security - Ricoh C249 Service Manual

MAIN MENU NO.8: SYSTEM TEST
Rev. 10/2004
⇒

5.9.7 SP8-18: TEMPORARY SECURITY

This function cancels "Security Mode" to prevent consumption of wasteful masters
when the service technician repairs/inspects the machine. When SP8-18 is "ON",
the drum rotates to the home position. You can pull out the drum unit from the
machine. At this time, the color of the operation panel appears as a negative image.
See the illustration below.
Normal Image Negative Image
NOTE: Set SP 8-18 "OFF" after you repair/inspect the machine.
Additional explanation:
"Security Mode" is used to prevent others from accessing your masters and making
prints of confidential documents. You cannot press the "proof" key or the "Print" key,
nor, pull out the drum unit when you set "Security Mode". You cannot clear
"Security Mode" by turning OFF the main switch. The job will not occur when you
set a new original and press the "START" key.
C249 5-28 SM