Sp9-1/ Sp9-1-1 (Hex Dump Print); Sp9-2 To -3/ Sp9-1-2; Print) - Ricoh C249 Service Manual

SP9-1/ SP9-1-1 (HEX Dump Print)

This prints Hex Dump data using the controller.
NOTE: The Hex Dump Print is not used.
SP9-2 to -3/ SP9-1-2 to -3 (Service Summary 1 Print, Service Summary 2

Print)

This prints a summary of all the controller settings.
1. Enter the Printer Controller SP mode, and select "Test Mode".
2. Select "Service Summary 1 Print" or "Service Summary 2 Print", then press the
# key.
• Model Number / System Version / Unit Number
Lists the machine's Plug&Play name, controller firmware version, and the
controller part number.
• Program List
Lists the firmware module version.
• Bit Switch
Lists the current bit switch settings. Designer use only and should not be touched.
• Counter
Lists all the counters in the controller.
NOTE: Some counters listed in the report, such as the "Duplex Printed Page
Count" are not actually used.
• Exception Information
Lists CPU exception error information. Designer use only and should not be
touched.
• System Logging / System Logging 2
Lists internal log data. Designer use only and should not be touched.
SM
SERVICE PROGRAM MODE OVERVIEW
23 C624