Service Tables; Using Service Program Modes; Accessing Sp Modes; Entering Sp Mode - Ricoh C249 Service Manual

5. SERVICE TABLES

NOTE: The Service Program Mode is for use by service representatives only so
that they can properly maintain product quality. If this mode is used by
anyone other than service representatives for any reason, data might be
deleted or settings might be changed. In such case, product quality cannot
be guaranteed any more.

5.1 USING SERVICE PROGRAM MODES

Use the service program modes (SP modes) to check electrical data, change
operating modes, and adjust values.

5.1.1 ACCESSING SP MODES

Entering SP Mode

1. Press the following sequence of keys.
→ → →
• Hold the
key down for longer than 3 seconds.

Leaving SP Mode

Press the key one or more times.
SM
USING SERVICE PROGRAM MODES
→
5-1 C264