DRUM
3.9 DRUM
3.9.1 PREPARATION
Before attempting any of the procedures in this section, wipe off the ink around the
ink roller. To do this, set SP2-10 (ink detection) to OFF, and feed paper until ink
ends.
After finishing the required procedures in this section, do not forget to return SP2-
10 to the default (ink detection on).
3.9.2 CLOTH SCREEN
[B]
[A]
C238R053.WMF
• Remove the drum
C238R054.WMF
1. Remove the drum upper bracket ( x 4).
2. Release the stopper [A], then rotate the drum until the master clamper faces
top.
3. Remove the cloth screen [B] ( x 4).
SM
3-29
C249