Image Adjustment (Sp6-10, -21, -5, -3, And -1); Sp6-10: Master Writing Speed; Sp6-21: Paper Registration Position; Sp6-05: Scanning Speed - Platen - Ricoh C249 Service Manual

MAIN MENU NO.6: ADJUSTMENT

5.7.3 IMAGE ADJUSTMENT (SP6-10, -21, -5, -3, AND -1)

Adjusts the image position on prints by changing the SP settings.
Adjust the following in the given order.

SP6-10: Master writing speed

↓

SP6-21: Paper registration position

↓

SP6-05: Scanning speed - platen

SP6-06: Scanning speed - ADF

↓

SP6-03: Scanning start position - platen

SP6-04: Scanning start position - ADF

↓

SP6-01: Main scan position - platen

SP6-02: Main scan position - ADF

↓

SP6-31: SBU calibration (

When correcting errors made when printing with the controller, use only the first
two procedures.
When correcting errors made when printing with scanned originals, do all six
adjustments in the given order.
This adjustment is required every time the RAM on the MPU has been replaced.
C264
5.7.4)
5-16 SM