DRUM
3.8.11 MAIN DRIVE TIMING BELT ADJUSTMENT
[E]
[D]
[A]
[B]
[C]
[E]
Purpose: After the timing belt is replaced, correct belt tension must be applied.
• Rear covers (
3.2.2)
• MPU (
3.2.4)
1. Loosen the screws [A], [B], and [C].
2. Move the tension roller [D] to the right with a screwdriver [E] as shown.
3. Tighten the screws [A], [B], and [C].
4. Remove the screwdriver.
C264
3-40
SM