Ricoh C249 Service Manual page 139

1. Set SP2-34 (Slow starting mode) to a value of "30 rpm" (print from 30 rpm).
2. Set SP8-10 (Test patterns) to a value of "6", then press the Start key.
3. Access SP4-91 (Ink temperature), check a value of the ink temperature.
4. Make 6 copies at speed 5 (finishing with 120 rpm). Perform the adjustment
below for all 6 copies.
Trail print: 30 rpm
1st print : 45 rpm
2nd print: 60 rpm
3rd print: 75 rpm
4th print: 90 rpm
5th print: 105 rpm
6th print: 120 rpm
NOTE: When values of the ink temperature are low (below 15 degree) or high (28
degree or above), make 7 copies at speed 5. Perform the adjustment
below for 6 copies expect for 2nd print.
Trail print: 30 rpm
1st print : 45 rpm
2nd print: 45 rpm
3rd print: 60 rpm
4th print: 75 rpm
5th print: 90 rpm
6th print: 105 rpm
th
7 print: 120 rpm
SM
MAIN MENU NO.6: ADJUSTMENT
[C]
[D]
C249S912.WMF
5-23 C249