Ricoh C249 Service Manual page 38

INSTALLATION PROCEDURE
Installation Procedure
- For C238, C247 and C249 -
[A]
C249I536.WMF
1. Turn off the main switch and unplug the power cord.
2. Remove the paper delivery plate (4 screws).
3. Cut the cap [A] off the rear cover of the main body with pliers, then connect the
tape marker cable to the main body.
4. Install the auxiliary bracket [B] (#C5326502) on the tape marker with M4 x 8
screws (accessories) [C].
NOTE: Install the lock washer [E] (accessories) with the lower of the two
screws.
5. Install the tape marker on the main body with two knob screws [D]
(accessories) in the two outer holes in the tape marker bracket.
6. Reinstall the paper delivery plate.
7. Refer to "Common Steps".
C249
[B]
1-16
Rev.04/2004
[D]
[C]
C249I994.WMF
[E]
SM