Service Tables - Ricoh C249 Service Manual

USING SERVICE PROGRAM MODES

5. SERVICE TABLES

The Service Program Mode is for use by service representatives only so that they
can properly maintain product quality. If this mode is used by anyone other than
service representatives for any reason, data might be deleted or settings might be
changed. In such case, product quality cannot be guaranteed any more.
5.1 USING SERVICE PROGRAM MODES
Use the service program modes (SP modes) to check electrical data, change
operating modes, and adjust values.
5.1.1 ACCESSING SP MODES
Entering SP Mode
1. Key in the following sequence.
 →  →  →  → 
• Hold the  key down for longer than 3 seconds.
Leaving SP Mode
Press the  key one or more times.
SM 5-1 C249