Ricoh C249 Service Manual page 140

MAIN MENU NO.6: ADJUSTMENT
5. Check the area from the leading edge to about 30 mm down for any doubled or
blurred images.
6. If any are present, access SP6-125 to 131 and then input a value to adjust the
doubled or blurred images (range: -90 to 8, step: 1) for each of 6 copies
samples (i.e. 30, 60, 75, 90, 105 and 120 rpm samples).
Higher values ([C]): Blurred images improve, doubled images tend to be more
noticeable.
Lower values ([D]): Doubled images improve, blurred images tend to be more
noticeable.
7. Perform the adjustment again where necessary.
8. Return SP2-34 (Slow starting mode) to the value it was at before the
adjustment.
C249 5-24 SM