Ipv6 Source Guard Policy Setup - ZyXEL Communications GS2210 Series User Manual

Intelligent layer 2 gbe switch
Hide thumbs Also See for GS2210 Series:
Table of Contents

Advertisement

Table 112 Advanced Application > IP Source Guard > IPv6 Static Binding Setup (continued)
LABEL
Port
Delete
Cancel

26.14 IPv6 Source Guard Policy Setup

Use this screen to have IPv6 source guard forward valid IPv6 addresses and/or IPv6 prefixes that
are stored in the binding table and allow or block data traffic from all link-local addresses. To open
this screen, click Advanced Application > IP Source Guard > IPv6 Source Guard Policy
Setup.
• If you select Validate Address and not Validate Prefix, traffic for a binding entry that matches
an IPv6 address and VLAN ID, port number, and MAC address will be forwarded. If this binding
entry is an IPv6 prefix, the traffic will be denied.
• If you select Validate Prefix and not Validate Address, traffic for a binding entry that matches
an IPv6 prefix and VLAN ID, port number, and MAC address will be forwarded. If this binding
entry is an IPv6 address, the traffic will be denied.
• If you select both Validate Prefix and Validate Address then traffic matching either IPv6
address or prefix will be forwarded.
Figure 171 Advanced Application > IP Source Guard > IPv6 Source Guard Policy Setup
The following table describes the labels in this screen.
Table 113 Advanced Application > IP Source Guard > IPv6 Static Binding Setup
LABEL
Name
Validate Address
Validate Prefix
Chapter 26 IP Source Guard
DESCRIPTION
This field displays the port number in the binding. If this field is blank, the binding applies
to all ports.
Select an entry's check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Select an entry checkbox and click Delete to remove the specified entry.
Click this to clear the check boxes above.
DESCRIPTION
Enter a descriptive name for identification purposes for this IPv6 source guard policy.
Select Validate Address to have IPv6 source guard forward valid addresses that are
stored in the binding table.
Select Validate Prefix to have IPv6 source guard forward valid prefixes that are stored
in the binding table.
GS2210 Series User's Guide
247

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents