ZyXEL Communications GS2210 Series User Manual page 65

Figure 49 Basic Setting > System Info (for PoE model(s) only)
The following table describes the labels in this screen.
Table 12 Basic Setting > System Info
LABEL DESCRIPTION
System Name This field displays the descriptive name of the Switch for identification purposes.
Product Model This field displays the product model of the Switch. Use this information when searching for
firmware upgrade or looking for other support information in the website.
ZyNOS F/W This field displays the version number of the Switch 's current firmware including the date
Version created.
Ethernet This field refers to the Ethernet MAC (Media Access Control) address of the Switch.
Address
CPU Utilization CPU utilization quantifies how busy the system is. Current (%) displays the current
percentage of CPU utilization.
Memory Memory utilization shows how much DRAM memory is available and in use. It also displays
Utilization the current percentage of memory utilization.
Hardware Monitor
Temperature The Switch has temperature sensors that are capable of detecting and reporting if the
Unit temperature rises above the threshold. You may choose the temperature unit (Centigrade or
Fahrenheit) in this field.
Temperature BOARD, MAC and PHY refer to the location of the temperature sensors on the Switch
printed circuit board.
Current This shows the current temperature at this sensor.
MAX This field displays the maximum temperature measured at this sensor.
MIN This field displays the minimum temperature measured at this sensor.
Chapter 8 Basic Setting
GS2210 Series User's Guide
65