ZyXEL Communications GS2210 Series User Manual page 45

Connect your computer to any Ethernet port on the Switch. Make sure your computer is in the same
1
subnet as the Switch.
Open your web browser and enter 192.168.1.1 (the default IP address) in the address bar to access
2
the web configurator. See
Click Basic Setting > IP Setup in the
3
navigation panel.
Configure the related fields in the IP Setup
4
screen.
For the VLAN2 network, enter 192.168.2.1 as
5
the IP address and 255.255.255.0 as the
subnet mask.
In the VID field, enter the ID of the VLAN group
6
to which you want this management IP address
to belong. This is the same as the VLAN ID you
configure in the Static VLAN screen.
Click Add to save your changes back to the run-
7
time memory. Settings in the run-time memory
are lost when the Switch's power is turned off.
Chapter 5 Initial Setup Example
Section 4.2 on page 34
GS2210 Series User's Guide
45
for more information.