Table 157 Advanced Application > OAM > OAM Remote Loopback (continued)
LABEL
DESCRIPTION
Test
Click Test to begin the test.
Remote
Loopback Mode
Port
Enter the number of the port from which the Switch sends loopback control PDUs to initiate
or terminate a remote-loopack test.
Start
Click Start to initiate a remote-loopback test from the specified port by sending Enable
Loopback Control PDUs to the remote device.
Stop
Click Stop to terminate a remote-loopback test from the specified port by sending Disable
Loopback Control PDUs to the remote device.
Chapter 36 OAM
GS2210 Series User's Guide
325