ZyXEL Communications GS2210 Series User Manual page 233

Figure 160 Advanced Application > IP Source Guard > IPv4 Source Guard Setup > DHCP Snooping
> Configure > Port
The following table describes the labels in this screen.
Table 102 Advanced Application > IP Source Guard > IPv4 Source Guard Setup > DHCP Snooping >
Configure > Port
LABEL
Port
*
Chapter 26 IP Source Guard
DESCRIPTION
This field displays the port number. If you configure the * port, the settings are
applied to all of the ports.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use
this row first to set the common settings and then make adjustments on a port-by-
port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
GS2210 Series User's Guide
233