26.18 IPv6 DHCP Trust Setup
Use this screen to specify which ports are trusted for DHCPv6 snooping. To open this screen, click
Advanced Application > IP Source Guard > IPv6 DHCP Trust Setup.
Note: DHCPv6 solicit packets are sent from a DHCPv6 client to a DHCPv6 server. Reply
packets from a DHCPv6 server connected to an untrusted port are discarded.
Use port * to have all ports be Untrusted or Trusted.
Figure 175 Advanced Application > IP Source Guard > IPv6 DHCP Trust Setup
The following table describes the labels in this screen.
Table 117 Advanced Application > IP Source Guard > IPv6 DHCP Trust Setup
LABEL
Active
Port
Chapter 26 IP Source Guard
DESCRIPTION
Select this to specify whether ports are trusted or untrusted ports for DHCP snooping. If
you do not select this then IPv6 DHCP Trust is not used and all ports are automatically
trusted.
This field displays the port number. If you configure the * port, the settings are applied to
all of the ports.
GS2210 Series User's Guide
252