Erase Running-Configuration - ZyXEL Communications GS2210 Series User Manual

The following table describes the labels in this screen.
Table 176 Management > Maintenance
LABEL
Current
Firmware
Upgrade
Restore
Configuration
Backup
Configuration
Erase Running-
Configuration
Save
Configuration
Reboot System
Tech-Support

42.2.1 Erase Running-Configuration

Follow the steps below to reset the Switch back to the factory defaults.
In the Maintenance screen, click the Click Here button next to Erase Running-Configuration
1
to clear all Switch configuration information you configured and return to the factory defaults.
Click OK to reset all Switch configurations to the factory defaults.
2
Figure 249 Erase Running-Configuration: Confirmation
Chapter 42 Maintenance
DESCRIPTION
This field displays which configuration (Configuration 1 or Configuration 2) is currently
operating on the Switch.
Click Click Here to go to the Firmware Upgrade screen.
Click Click Here to go to the Restore Configuration screen.
Click Click Here to go to the Backup Configuration screen.
Click Click Here to reset the configuration to the factory default settings.
Click Config 1 to save the current configuration settings to Configuration 1 on the
Switch.
Click Config 2 to save the current configuration settings to Configuration 2 on the
Switch.
Click Config 1 to reboot the system and load Configuration 1 on the Switch.
Click Config 2 to reboot the system and load Configuration 2 on the Switch.
Click Factory Default to reboot the system and load the default configuration settings on
the Switch.
Note: Make sure to click the Save button in any screen to save your settings to the current
configuration on the Switch.
Click Click Here to see the Tech-Support screen. You can set CPU and memory thresholds
for log reports and download related log reports for issue analysis. Log reports include CPU
history and utilization, crash and memory.
GS2210 Series User's Guide
354