Configuring Dhcpv4 Global Relay - ZyXEL Communications GS2210 Series User Manual

Table 169 IP Application > DHCP > DHCPv4 > Option 82 Profile (continued)
LABEL
string
Remote-ID
Enable
mac
string
Add
Cancel
Profile Name
Circuit-ID
Enable
Field
Remote-ID
Enable
Field
Delete
Cancel

40.4.3 Configuring DHCPv4 Global Relay

Use this screen to configure global DHCPv4 relay. Click IP Application > DHCP > DHCPv4 in the
navigation panel and click the Global link to display the screen as shown.
Figure 237 IP Application > DHCP > DHCPv4 > Global
Chapter 40 DHCP
DESCRIPTION
Enter a string of up to 64 ASCII characters that the Switch adds into the client DHCP
requests. Spaces are allowed.
Use this section to configure the Remote ID sub-option to include information that identifies
the relay agent (the Switch).
Select this option to have the Switch append the Remote ID sub-option to the option 82
field of DHCP requests.
Select this option to have the Switch add its MAC address to the client DHCP requests that
it relays to a DHCP server.
Enter a string of up to 64 ASCII characters for the remote ID information in this field.
Spaces are allowed.
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch's run-time memory. The Switch loses these changes
if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Click Cancel to reset the fields to their last saved values.
This field displays the descriptive name of the profile. Click the name to change the
settings.
This field displays whether the Circuit ID sub-option is added to client DHCP requests.
This field displays the information that is included in the Circuit ID sub-option.
This field displays whether the Remote ID sub-option is added to client DHCP requests.
This field displays the information that is included in the Remote ID sub-option.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Check the entry(ies) that you want to remove and then click the Delete button.
Click Cancel to clear the selected check box(es).
GS2210 Series User's Guide
341