ZyXEL Communications GS2210 Series User Manual page 317

Figure 219 Advanced Application > BPDU Guard > BPDU Guard Configuration
The following table describes the labels in this screen.
Table 153 Advanced Application > BPDU Guard > BPDU Guard Configuration
LABEL DESCRIPTION
Active Select this option to enable BPDU guard on the Switch.
Port This field displays the Switch's port number.
* Use this row to make the setting the same for all ports. Use this row first and then make
adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active Select this check box to enable the BPDU guard feature on this port. The Switch shuts down
this port if there is any BPDU received on the port.
Clear this check box to disable the BPDU guard feature.
Apply Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Chapter 35 BPDU Guard
GS2210 Series User's Guide
317