Ip Policy Routing Setup; Figure 13-1 Ip Routing Policy Setup - ZyXEL Communications Prestige 643 User Manual

Prestige 643 ADSL Router

13.1.3 IP Policy Routing Setup

Menu 25 shows all the policies defined
Policy
Set #
------
1
2
3
4
5
6
To setup a routing policy, follow the procedures below:
Step 1. Enter 25 in the Main Menu to open Menu 25 – IP Policy Routing Setup.
Step 2.
Enter the index of the policy set and a name that you wish to configure to open Menu 25.1 - IP
Policy Routing Summary.
Menu 25.1 shows the summary of a policy set, including the criteria and the action of a single policy, and
whether a policy is active or not. Each policy contains two lines. The former part is the criteria of the
incoming packet, and the latter is the action. Between these two parts, the separator '|' means the action is
taken on criteria matched and the separator '=' means the action is taken on criteria not matched.
13-2
Menu 25 - IP Routing Policy Setup
Name
-----------------
test
_______________
_______________
_______________
_______________
_______________
Enter Policy Set Number to Configure= 0
Edit Name= N/A
Press ENTER to Confirm or ESC to Cancel:

Figure 13-1 IP Routing Policy Setup

Policy
Set # Name
------ -----------------
7 _______________
8 _______________
9 _______________
10 _______________
11 _______________
12 _______________
IP Policy Routing