Lldp Remote Status - ZyXEL Communications GS2210 Series User Manual

Table 137 Advanced Application > LLDP > LLDP Local Status > LLDP Local Port Status Detail
LABEL
Network Policy
TLV
Location
Identification
TLV

33.5 LLDP Remote Status

This screen displays a summary of LLDP status for each LLDP connection to a neighboring Switch.
Click Advanced Application > LLDP > LLDP Remote Status (Click Here) to display the screen
as shown next.
Figure 204 Advanced Application > LLDP > LLDP Remote Status
The following table describes the labels in this screen.
Table 138 Advanced Application > LLDP > LLDP Remote Status
LABEL
Index
Local Port
Chassis ID
Port ID
Port Description
System Name
Management
Address
Chapter 33 Link Layer Discovery Protocol (LLDP)
DESCRIPTION
This displays a network policy for the specified application.
• Voice
• Voice-Signaling
• Guest-Voice
• Guest-Voice-Signaling
• Softphone-Voice
• Video-Conferencing
• Streaming-Video
• Video-Signaling
This shows the location information of a caller by its ELIN (Emergency Location Identifier
Number) or the IETF Geopriv Civic Address based Location Configuration Information
(Civic Address LCI).
• Civic LCI - IETF Geopriv Civic Address based Location Configuration Information
• ELIN - (Emergency Location Identifier Number)
• Coordinate-based LCI - latitude, longitude and altitude coordinates of the location
Configuration Information (LCI)
DESCRIPTION
The index number shows the number of remote devices that are connected to the
Switch. Click on an index number to view the detailed LLDP status for this remote device
in the LLDP Remote Port Status Detail screen.
This is the number of the Switch's port that received LLDPDU from the remote device.
This displays the chassis ID of the remote device associated with the transmitting LLDP
agent. The chassis ID is identified by the chassis ID subtype. For example, the MAC
address of the remote device.
This is an alpha-numeric string that contains the specific identifier for the port from
which this LLDPDU was transmitted. The port ID is identified by the port ID subtype.
This displays a description for the port from which this LLDPDU was transmitted.
This displays the system name of the remote device.
This displays the management address of the remote device. It could be the MAC
address or IP address. You can click on the IP address hyperlink directly.
GS2210 Series User's Guide
291