ZyXEL Communications GS2210 Series User Manual page 108

source MAC address in the MAC-based VLAN setup screen. You can also delete a MAC-based VLAN
entry in the same screen.
Click the MAC Based VLAN Setup link in the VLAN Configuration screen to see the following
screen.
Figure 82 Advanced Application > VLAN > VLAN Configuration > MAC Based VLAN Setup
The following table describes the fields in the above screen.
Table 41 Advanced Application > VLAN > VLAN Configuration > MAC Based VLAN Setup
LABEL DESCRIPTION
Name Type a name up to 32 alpha numeric characters for the MAC-based VLAN entry.
MAC Address Type a MAC address that is bind to the MAC-based VLAN entry. This is the source MAC
address of the data packet that is looked up when untagged packets arrive at the
Switch.
VID Type an ID (from 1 to 4094) for the VLAN ID that is associated with the MAC-based
VLAN entry.
Priority Type a priority (0-7) for the MAC-based VLAN entry.The higher the numeric value you
assign, the higher the priority for this MAC-based VLAN entry.
Add Click Add to save the new MAC-based VLAN entry.
Cancel Click Cancel to clear the fields in the MAC-based VLAN entry.
Index This field displays the index number of the MAC-based VLAN entry.
Name This field displays the name of the MAC-based VLAN entry.
MAC Address This field displays the source MAC address that is bind to the MAC-based VLAN entry.
VID This field displays the VLAN ID of the MAC-based VLAN entry.
Priority This field displays the priority level of the MAC-based VLAN entry.
Select an entry's check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Delete Click Delete to remove the selected entry from the summary table.
Cancel Click Cancel to clear the check boxes.
Chapter 9 VLAN
GS2210 Series User's Guide
108