Figure 11-1 Ip Routing Policy Setup - ZyXEL Communications Prestige 642 User Manual

Prestige 642 ADSL Internet Access Router
Policy
Set #
------ -----------------
1 test
2 _______________
3 _______________
4 _______________
5 _______________
6 _______________
To setup a routing policy, follow the procedures below:
Step 1.
Enter 25 in the Main Menu to open Menu 25 – IP Policy Routing Setup.
Step 2. Enter the index of the policy set you wish to configure to open Menu 25.1 - IP Policy Routing
Summary.
Menu 25.1 shows the summary of a policy set, including the criteria and the action of a single policy, and
whether a policy is active or not. Each policy contains two lines. The former part is the criteria of the
incoming packet, and the latter is the action. Between these two parts, separator '|' means the action is
taken on criteria matched and separator '=' means the action is taken on criteria not matched.
11-2
Menu 25 - IP Routing Policy Setup
Policy
Name Set #
------
10
11
12
Enter Policy Set Number to Configure= 0
Edit Name= N/A
Press ENTER to Confirm or ESC to Cancel:
Figure 11-1 IP Routing Policy Setup
Name
-----------------
7 _______________
8 _______________
9 _______________
_______________
_______________
_______________
IP Policy Routing