Heating System Inspection And Maintenance; Why Is Regular Maintenance Important; Preparing The Boiler For Cleaning - Buderus Logano GE615 Installation And Maintenance Instructions Manual

7

Heating system inspection and maintenance

7 Heating system inspection and maintenance
7.1 Why is regular maintenance
important?
Heating systems should be regularly maintained for the
following reasons:
– to achieve a high level of efficiency and to operate the
system economically (low fuel consumption),
– to achieve a high level of operational reliability,
– to maintain the cleanest possible combustion.
Offer an annual inspection and as-required maintenance
contract to your customer. The activities that must be con-
tained in a contract can be found in the inspection and
maintenance report (Æ see section 7.6, page 53 ff.).
Only use original spare parts. You may order
spare parts from the spare parts catalogue.
7.2

Preparing the boiler for cleaning

V Shut down the heating system (Æ see section 6.1,
page 45).
Warning: Danger to life
from electric shock.
z Before opening the panel: Isolate all poles
of the mains power supply and secure
against unauthorised re-connection.
Warning: Danger to life
through the explosion of volatile gases.
z Work on gas components must only be
carried out by qualified and authorised
personnel.
Opening the burner door
Caution: Damage to the casing parts
by opening the burner door.
z Unhook the front side panel sections
before opening the burner door.
z Using the hand hole, lift the side panel sections slightly
and remove. Do not remove the front panel sections
(burner door casing).
z Using a spanner, loosen the burner door fixing screws
from the side.
z Open the burner door.
46
Fig 61 Opening the burner door
1
2
3
Logano GE615 - We reserve the right to make any changes due to technical modifications.
Front side panel section (left)
Front side panel section (right)
Front panel section (burner door casing)