Buderus Logano GE615 Installation And Maintenance Instructions Manual page 34

4
Installation
V Depending on which side the door closes, screw the
burner cable strain relief to the left or right hand side of
the lower cross bar (Æ Fig. 44 – for right-hand burner
door closure).
z Push front plinth panel from the front into the lower
lengthways bars and screw them together.
z Fit the rear plinth panel in the same way.
Please see Æ Fig. 47, page 35 for the
arrangement of the side sections and hoods.
z Push the lower folded edge of the first side panel
section behind the lower lengthways bar, lift slightly
and hook the top of the section into the slots on the
upper lengthways bar.
z Push the lower folded edge of the remaining side panel
sections behind the lower lengthways bar, lift slightly
and hook the upper folded edge over the upper
lengthways bar.
34
Fig 44 Fitting the burner cable strain relief and plinth
1
2
3
Fig 45 Fitting the side panel section
1
2
3
Fig 46 Fitting the remaining side panel sections
1
2
Logano GE615 - We reserve the right to make any changes due to technical modifications.
panels
Burner cable strain relief
Lower cross bar
Front plinth panel
First side panel section
Upper lengthways bar
Lower lengthways bar
Upper lengthways bar
Lower lengthways bar