Heating System Inspection And Maintenance; Why Is Regular Maintenance Important; Preparing The Boiler For Cleaning - Buderus Logano G215 WS Installation And Maintenance Instructions Manual

11

Heating system inspection and maintenance

11 Heating system inspection and maintenance

11.1 Why is regular maintenance important?

Heating systems should be regularly maintained for the
following reasons:
– to achieve a high level of efficiency and to operate
the system economically (low fuel consumption),
– to achieve a high level of operational reliability,
– to maintain the cleanest possible combustion.
Offer an annual inspection and as-required
maintenance contract to your customer. You can check
in the inspection and maintenance reports what should
be included in such contracts (
page 52).
USER NOTE
You may order spare parts from the spare
parts catalogue.

11.2 Preparing the boiler for cleaning

Shut down the heating system (
page 47).
RISK TO LIFE
from electric shock.
Before you open the control device:
WARNING!
Isolate all poles of the mains power
supply and secure against
unauthorised re-connection.
Remove the burner door casing or the burner hood
from the boiler.
Pull the burner plug off the burner.
RISK TO LIFE
through the explosion of volatile gases.
Work on gas-carrying parts may only
WARNING!
be carried out by qualified and
authorised personnel.
48
Section 11.5,
Section 10.1,
Logano G215 WS - We reserve the right to make any changes due to technical modifications.