Table of Contents
Advertisement
4
Installation
z Clean nipple with a rag soaked in white spirit and coat
evenly with red lead putty.
z Insert nipple directly into the upper (size 4, 181/70)
and lower (size 2, 119/50) hub on the rear section.
z Rubber hammer nipple home with alternate heavy
blows.
The upper nipple must protrude
approx. 43 mm and the lower nipple
approx. 32 mm out of the corresponding
hubs.
z Use a file to remove any burrs.
The packing grooves must be clean and dry
to enable the packing cord to adhere
properly.
Caution: Risk to health
through noxious vapours and skin contact
during the processing of materials such as
adhesives, adhesive bases or red lead putty.
z Observe processing and safety
instructions on the material packaging.
z Ensure good ventilation in the installation
area.
z wear work gloves to avoid skin contact.
z The product and its container must be
treated as hazardous waste for disposal
purposes.
z Coat the packing grooves with adhesive (adhesive
base)
14
Fig 10 Driving nipples home
Fig 11 Coating the packing grooves with adhesive
1
Logano GE615 - We reserve the right to make any changes due to technical modifications.
Packing grooves
Hide quick links:
Advertisement
Table of Contents
