Heating System Inspection; Why Is Regular Maintenance Important; Preparing The Boiler For Inspection - Buderus Logano GB125 BE Installation And Maintenance Instructions Manual

8

Heating system inspection

8.1

Why is regular maintenance important?

Heating systems should be regularly maintained for the
following reasons:
• to achieve a high level of efficiency and to operate the
system economically (low fuel consumption),
• to achieve a high level of operational reliability,
• to maintain the cleanest possible combustion,
• to ensure reliable operation and a long service life.
Maintenance may only be carried out by a qualified
service technician. If parts are replaced, only Buderus
approved components may be used. Maintenance must
be carried out once a year. The results of the inspection
must be recorded in the inspection and maintenance log.
Spare parts can be purchased from your
Buderus distributor using the parts list
(Chapter 11, "Spare parts," page 53).
8.2

Preparing the boiler for inspection

DANGER: Risk of fatal injury from electric
shock!
B Before opening up the boiler,
isolate it completely from the mains power
supply and ensure the power cannot be
inadvertently reconnected.
B Shut down the heating system.
( Chapter 7.1, page 36)
B Remove burner hood from boiler.
( Chapter 3.1, page 12).
B Disconnect electrical power to burner.
Logano GB125 BE US/CA - Subject to technical modifications.
Heating system inspection
8
37