Table of Contents
Advertisement
2
Product Information
2
Product Information
2.1
Product overview
This boiler is a low temperature boiler that complies with
DIN EN 303 for oil or gas combustion with modulating
boiler water temperature control and no minimum return
temperature.
The main components of the Logano GE615 fan-assisted
boiler are:
– The boiler block transfers the heat generated by the
burner to the heating water.
– The boiler shell and insulation prevent energy loss.
– The control panel monitors and controls all electrical
boiler components.
2.2
Correct use
The Logano GE615 forced draft boiler is intended for
generating heating water. You may use any type-tested oil
or gas fired burners to EN 267 or EN 676 provided their
operating range meets the boiler specification.
Using the boiler for any other purpose will be considered
improper use. Buderus accepts no liability for any damage
resulting as a consequence of such use.
2.3
EU Declaration of Conformity
The design and operation of this product
conforms to European Directives and the
supplementary national requirements. Its
conformity is confirmed by the CE marking.
You can view the Declaration of Conformity
on the internet at www.buderus.de/konfo or
request a copy from your local Buderus
office.
4
Fig 1
1
2
3
4
Logano GE615 - We reserve the right to make any changes due to technical modifications.
Logano GE615 forced draft boiler
Boiler casing
Insulation
Boiler block
Control device
Hide quick links:
Advertisement
Table of Contents
