Buderus Logano GE615 Installation And Maintenance Instructions Manual page 17

z Place ratchet wrench onto clamping nut and compress
boiler sections by tightening evenly.
Caution: Risk of accident
from material fatigue. Improperly used or
poorly maintained compression tools may
break.
z Never work directly in front of the
compression tool while it is being
tensioned.
z Ensure that no one is standing in front of
the compression tool.
z Release and remove the boiler compression tool.
z Check nipples are seated correctly.
Caution: Compression tool damage
The compression tool may be damaged or
destroyed if you compress pull rods with
loose threaded connections.
z Always check the pull rods before each
use and tighten as necessary. The pull rod
is correctly positioned if it is fully inserted
and no thread is showing.
z Always keep the thread clean. Dirty
threads may damage the compression
tool during compression.
z Always grease threads thoroughly.
Logano GE615 - We reserve the right to make any changes due to technical modifications.
Fig 16 Boiler compression tool 2.3
1 Threaded connection on the pull rods (loosened)
2 Threaded connection on the pull rods (correct position)
4
Installation
17