Table of Contents
Advertisement
Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (07/10)
The 6KP6-RJSSC, when installed in a Magnum 6K32F Series Switch operates
on copper at the 100m distance. The Fiber is single-mode and cable lengths can be as
much as 25+ Km (see Power Budget, Section 4.5)
Each port has an Activity (ACT) LED indicating packets being received, a
Link (LK) LED that indicates proper connectivity with the remote device when lit, and a
FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The
10/100 LED indicates 100Mbps speed when lit and 10Mbps speed when off. To
distinguish the single-mode 6KP6-RJSSC from the multi-mode 6KP6-RJMSC, the label
"Sgl. M." is at the top of the faceplate of the 6KP6-RJSSC.
5.2.4
6KP6-RJSSCL 4 @ 10/100 Mb copper port and 2@100Mbps
single-mode FX-SC-type, "snap-in" connector
The Magnum 6KP6-RJSSC is also a Combo module equipped with 4 dual
speed copper ports and 2 Single-mode (Long Reach) SC-type connectors. It provides a
combination of copper and Fiber functions in one module to the 6K32F Series Switches,
supporting four Copper and two single-mode (Long-Reach) fiber network segments.
The 6KP6-RJSSC, when installed in a Magnum 6K32F Series Switch has
copper supporting the 100m distance and Fiber supporting single-mode fiber cable
lengths of as much as 40+ Km (see Power Budget, Section 4.5)
Each port has an Activity (ACT) LED indicating packets being received, a
Link (LK) LED indicating proper connectivity with the remote device when lit, and a
FDX/HDX LED indicating full-duplex mode when lit (or half-duplex when off). The
10/100 LED indicates the speed for the copper port, which is 100Mbps when the LED is
ON and 10 Mb when the LED is OFF.
5.2.4a
6KP6-RJ10ST 4 @ 10/100 Mb copper port and 2@10Mbps
multi-mode FL-ST-type, "twist-lock" connector
The Magnum 6KP6-RJ10ST is also a Combo module equipped with 4 dual
speed copper ports and 2 multi-mode 10 Mb fiber ST-type connectors. It provides a
combination of copper and Fiber functions in one module to the 6K32F Series Switches,
supporting four Copper and two 10Mb of ST fiber network segments.
The 6KP6-RJ10ST, when installed in a Magnum 6K32F Series Switch has
copper supporting the 100m distance and Fiber supporting the multi-mode fiber cable.
This allows it to connect the legacy network 10Mb requirement in the network. Each port
has an Activity (ACT) LED indicating packets being received, a Link (LK) LED
indicating proper connectivity with the remote device when lit, and a FDX/HDX LED
www GarrettCom com
.
.
51
Advertisement
Table of Contents
