Table of Contents
Advertisement
Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (07/10)
Step 3. The figure here illustrates the basic layout of an individual PM card. 6KPM
card fits into the space provided on the main board over the grand-daughter Bd. and the
male latched cream color connectors( as shown in below fig. with arrow mark).
Fig 3.5.2b: Daughter Board shown upside down with two male latch connectors
Step 4.
Hold the daughter board with both hands at the end and align the two cream
color latching connectors (male) placed at the bottom of the daughter board
with the other female connectors placed on the Granddaughter and main board.
As shown below in Fig. 3.5.2c
Fig 3.5.2c
Daughter Bd. Being placed over the Granddaughter Bd. and the
mating connector being matched to lockup properly
Step 5.
Once the latching connectors are aligned properly and the mounting holes are
aligned with stand offs then press slowly and firmly with two fingers (as shown
below in Fig. 3.5.2d) on the top of the latching connectors until the connectors
latch.
Fig.3.5.2d: Securely
latching up 6KPM Cards
into a Magnum 6K32F
Series chassis
www GarrettCom com
.
.
39
Advertisement
Table of Contents
