1B 6Kp4-F10St, Multi-Mode Fl-St Module; 1C 6Kp4-Flstfx, Multi-Mode 10Mb Fl-St, 100Mb Multi-Mode Fx-St Module - GarrettCom Magnum 6K32F Installation And User Manual

Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (07/10)
supports the standard distance 100m on each port and the fiber port supports fiber optic
cable distances up to the IEEE-standard 10Mbps distance limits, i.e., typically 2km at
full-duplex and half-duplex.
Each port has an Activity (ACT) LED indicating packets being received, a
Link (LK) LED that indicates proper connectivity with the remote device when lit, and
FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The
10/100 LED indicates the speed, 100Mbps if the LED is ON, 10Mbps if it is OFF,.
5.2.1b 6KP4-F10ST, 4@10Mb multi-mode FL-ST "twist lock" Module
The Magnum 6KP4-
F10ST is a 10Mb multi-mode
fiber module with 4 ST-Fiber
ports. All four fiber ports are ST
connectors and configured as
10Mb Half-duplex by default.
The 10Mb ST-fiber ports allow
the user to connect their legacy
10Mb network to the Magnum
6K32F Series switch. They also
provide a convenient way for the
half duplex hub to connect to the switch through 10Mb fiber ports. It supports distances
according to the 10Base-FL standard i.e, 2Km distance for multi-mode fiber. (Single-
mode for 10Km distance may be available as a special order).
Each port has an Activity (ACT) LED indicating packets being received, a
Link (LK) LED indicating proper connectivity with the remote device when lit, and
FDX/HDX LED indicating full-duplex mode when lit (or half-duplex if off).
5.2.1c 6KP4-FLSTFX, 2@10Mb and 2@100Mb multi-mode FX-ST "twist
lock" Module
The Magnum 6KP4-FLSTFX is a combo fiber module with two 10Mb + two
100Mb multi-mode fiber module for a total of 4 ST-Fiber ports. All four fiber ports are
ST connectors and configured as 10Mb Half-duplex by default for 10Mb fiber and
100Mb Full duplex for the 100Mb fiber. The 10Mb ST-fiber ports allow the user to
connect their legacy 10Mb network to the Magnum 6K32F Series switch. They also
provide a convenient way for the half duplex hub to connect to the switch through 10Mb
fiber ports. Whereas the 100Mb ST module allows it to connect the 100Mb demand of
www GarrettCom com . .
49