Table of Contents
Advertisement
Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (07/10)
features include SNMPv3, SSL/SSH, 802.1X, TACACS+, Port Security, and Tagged
VLANs as well as a secure, user friendly web based option. IGMP Snooping and
IGMP-L2 features provide most IGMP Layer 3 functions for multicast traffic with
Magnum 6K-Switches thus enabling an economical solution without Routers or Layer 3
switches for streaming video applications.
See MNS-6K materials for further details about management software.
http://www.garrettcom.com/techsupport/software/userguides/mns6k_webmanual.p
df
(web)
http://www.garrettcom.com/techsupport/software/userguides/mns6k_CLI.pdf
(CLI)
Evolving mixed-media requirements for 10Mb and 100Mb fiber, copper, and
1000Mb Gigabit Ethernet can be simply and reliably handled by the Magnum 6K32F
Series products.
The port flexibility feature is achieved using a large family of 6K modules with
various copper and fiber capabilities built-in. High fiber port density is achieved using
Small Form Factor LC or MTRJ connectors and multimode and single-mode fiber
networks from 2 to over 100km are accommodated. Each module can support up to 8
ports of fiber or RJ-45 copper connectors as well as various fiber and copper
combinations. Fixed one and two Gigabit fiber and copper modules are available along
with modules for use with GBIC and SFP fiber and copper transceivers making this
product adaptable to almost any network need. Modules are factory configured in a base
chassis (or may be changed in the field by trained technicians) to adapt the unit to the
user's specific Ethernet media requirements.
The strong aluminum case and wide selection of power-input options including
-48VDC, 24VDC, 125/110 VDC, 250VDC and universal 110/240VAC target the
Magnum 6K32F Series for heavy-duty applications. The chassis rack mounting style of
the 6K32FR / FRC is "Reverse" (with the ports and LEDs and the power-input and the
management console connector all in the rear and a duplicate set of LEDs in the front).
Rack widths accommodated include standard 19" RETMA, ETSI, and 23" Telco. The
AC, and –48VDC power input options are designed for Telco environments, while the
24VDC is designed for Industrial/Control Room applications. The 125 & 250VDC
www GarrettCom com
.
.
11
Advertisement
Table of Contents
