Table 12: User Configuration : - A - D-Link GLV-540 User Manual

Table 12: User Configuration: - Advanced Features
User Configuration : Advanced Features
This is a drop down list to select the User ID for which the
Feature settings will be shown. Admin can select any User
ID to configure the user feature settings.
User ID
Value Range: Available User ID's List
Default Value:User1
Enable this field to automatically dial a number when user
goes off-hook.
Hot line Value Range: <Enable> <Disable>
Default Value: <Disable>
This specifies the hot line number to be dialed when user
goes off-hook.
Value Range: Accepts the following values with maximum of
90 chars:
Hot Line
Number
Default Value: 100
This specifies the time after which the hot line will be dialed
after the user goes off hook. When it is 0, the number will
Interval be dialed immediately after off hook.
(Warm Line
Timeout) Value Range: 0 - 60 seconds
Default Value: 5
Enable this flag to replace the caller's
anonymous string in the outgoing calls. Setting this flag,
both callers' display name and phone number would be
Anonymous replaced with this anonymous string in the outgoing calls.
Calls
Value Range: <Enable> <Disable>
Default Value: <Disable>
This string is used when anonymous for outgoing call is
enabled.
Anonymous
String Value Range: letters, digits, underscore, hyphen
Default Value: Anonymous
Enable this flag to reject all incoming calls with user Identity
as Anonymous.
Anonymous
Call
Value Range: <Enable> <Disable>
Rejection
Default Value: <Disable>
phone number
ip url without port number (UID@ip)
S
sip url with port number (UID@ip:port)
ip without port number (ip)
ip with port number (ip:port)
GLV-540 User Manual
identity with
73