Table of Contents
Advertisement
Though the phone will receive calls for all available users,
only one user (current user) will appear as owner of the IP
phone. All outgoing calls from the IP phone will use current
User configurations by default, unless another user is
selected explicitly while making a call.
Set as
This field specifies if this user is the current user of the IP
Current User
phone or not.
Value Range :< Enable> <Disable>
Default Value: <Enable >
This feature helps a user when he wants to use this IP phone
to make and receive calls. To use the phone for making or
receiving the calls, that user should be
available users will be registered by the phone. "Not
Available" user will be unregistered and cannot make or
User Status
receive any calls. When a current User is set as unavailable,
the next available user will be set as current User.
Value Range: <Available>, <Not Available>
Default Value: <Available>
Registration
This field shows the SIP Registration status of the selected
Status
user.
Table 11: User Configuration: - Features
User Configuration : Features
This is a drop down list to select the User ID for which the
Feature settings will be shown. Admin can select any User
ID to configure the user feature settings.
User ID
Value Range: Available User ID's List
Default Value:User1
This field is the drop down list of available Ring ID's. The
user can select a ring type for his incoming calls. However, if
the caller has been assigned any specific ring, that will take
precedence over this feature. For downloading the Custom
Ringer Type
Ring, refer to "Device Management / Configuration" page.
Value Range: <Ring1> <Ring2> <Ring3> <Custom Ring>
Default Value :< Ring1>
Enable this field for automatically accepting the incoming call
for the above User ID if he is current User of the phone.
Auto Answer
Value Range: <Enable> <Disable>
Default Value: <Disable>
This field specifies the number of rings after which the call to
be answered.
Auto Answer
Value Range: 0-9
After
Default Value: 2
Note: To work this feature, please ensure that this
configured
timeout should be less than the configured Alert Timeout.
number
of
rings
including
GLV-540 User Manual
"Available".
Only
with
its
ring's
70
Advertisement
Table of Contents
