Figure 34: Answering An Incoming Call - D-Link GLV-540 User Manual

Now if another incoming call arrives at GLV say on Line 2, the L2 LED
o
will blink. To select and view information for call on Line 2, press the
Line key labeled L2.
The LCD will display the following menu (for call on L2):-
To answer this call press the soft key labeled "Answer", otherwise to
o
select call on Line 1, press the Line key labeled "L1"
Note:
If an incoming call arrives while the LCD is displaying phone book or speed
dial entries, then new call indication is not provided on the LCD.
A line LED will blink to indicate the incoming call.
To answer this call, either off-hook or press the line LED to select the line and
then answer the call as given in section 4.5.1 "Answering Single Incoming
call".
Note:
The phone cannot be used to initiate calls, when "MENU" configuration is
being used.
Menu configuration is accessed by pressing the "MENU" key when phone is
idle.
When two available users are using the same VOIP account and there is
incoming call to any of the user, the incoming call will be mapped to the first
user and LCD always displays the call for that first user.
03 Jul 07 GLV
From "Alice" 2674358
To IP Phone user1
Answer Forward
Figure 34: Answering an incoming call (multiple)
GLV-540 User Manual
12:17:10
Reject
30