Table 29: Factory Reset; Table 30: Help; Table 31: Logout - D-Link GLV-540 User Manual

Table 29: Factory Reset

Factory Reset
Click on "Factory Reset" button to restore the system
default values which were programmed at factory.
Admin can do entire system factory reset including for all
users. In this case you will lose all configuration
modifications and parameters like All Sip Accounts,
All User's – Phone books, speed dial, dial plan, call history,
Users Features, Network settings, Audio settings etc will be
set to system defaults. Also note that the device IP will
change to 10.0.0.1 and the GUI connection will be
accessible though this IP only. It is recommended that you
backup your configuration before continuing this operation.
Admin can reset selected User configuration settings to the
factory reset which includes User's Phone book, Speed dial,
Factory Reset Dial Plan, User Features, Call History, will be reset with the
default user configurations.
Reset: This is Radio button which allows you either to do
factory reset to the complete system or only to the selected
user. If you are logged in with Admin privilege, you can
select from here.
User: This is a drop down list whether to select Factory
Reset for all users configuration or only selected users. If
you are logged with Admin privilege, you can either do for
all users or for selected user.

Table 30: Help

Help
Help

Table 31: Logout

Logout
Logout
Value Range: < System> <User>
Default Value:User
Value Range: All, User1 ...
Default Value:All
Click on this link to display a complete list of Help menu.
Click on this link to log out from device Web, this operation
will end your connection to the device. If any changes are
made to configurations, you will be asked to APPLY those
changes before going Logout; otherwise all the changes will
be lost.
GLV-540 User Manual
96