Configuration Through Web Browser; Table 5: Device Configuration - D-Link GLV-540 User Manual

6.2 Configuration through Web Browser

Table 5: Device Configuration

Field Description
This specifies the Usage Mode of the IP Phone. This mode
defines whether the Phone to be used by single user or by
multiple users. A change in the User Mode parameter will
cause IP Phone to reboot.
Value:
User Mode
Default Value: "Single User"
This field controls the type of tones played by IP Phone. To
specify custom settings
country code "OTHERS" and click on "Tone Setting" button.
Any change in the Country Code parameter will cause IP
Phone to reboot.
Country
Code Value Range:
<India>, <USA>, <China>, <Taiwan>, <Japan>, <UK>,
<MiddleEast>, <Others>
Default Value: <India>
One can define the tone characteristics for each of the
following tones or select to play downloaded sound file.
Tone
Single User: Here, only one user can use the Phone; that
user only can make and receive calls. The user whose is
set as "Current User" at "User Configuration / Users"
page shall use the Phone.
Multi User: Here, multiple users can use the Phone; any
user can make and receive calls at any time. All users
whose "user status" field is set as "Available" at "User
Configuration" page can use the phone.
Dial Tone: This tone is played when in off-hook indicating
that the phone is ready.
Busy Tone: This tone is played when the called party is
busy.
Ringback Tone: This tone is played when the called
party's phone has started ringing
Progress Tone: This tone is played when call is in
progress and phone is waiting for the response from the
remote party.
Call Hold Tone: This tone is played when hold reminder
timeout expired.
Call Waiting Tone: This tone is played to indicate another
waiting call.
Error Tone: This tone is played to indicate end of call and
other error states.
Ring 1/2/3: There are three ring tones for indicating
incoming call.
GLV-540 User Manual
for these parameters, choose
53