Table 16: Device Management : S - D-Link GLV-540 User Manual

Table 16: Device Management: Software
Device Management: Software
This section lists the Software Upgrade configuration settings. Only Admin
can modify this section.
Software
Upgrade
Server Type
Server
Address
IP Address
Port
Proxy Server
Address
Port
Server
Authentication
User Name
Enable this flag for configuring the software upgrade
settings and for initiating the Software upgrade procedure.
Value Range: <Enable> <Disable>
Default Value: <Disable>
This is a drop down list to select the type of server for
software upgrade.
Value Range: <TFTP><HTTP>
Default Value: <TFTP>
This is the drop down list to select the option to set the
server address for software upgrade.
Value Range: <Get from DHCP> <Static>
Default Value: <Static>
Note: Get from DHCP option is available only when the IP
Mode is DHCP.
This specifies the IP address or domain name of the
software upgrade server, if Server Address is configured as
"Get from DHCP", this address would be retrieved (if
available) from the DHCP response and if it is "Static", you
can set this address.
Value Range: Any valid IP address or domain name
(maximum size of 50 characters) in dot separated form.
Default Value: 10.0.0.254
This specifies the port where the Upgrade server is
running.
Value Range: 1 to 65535; For TFTP: 69; for HTTP / HTTPS:
80
Default Value: 69
This specifies the address of the proxy server and it is
useful in traversing through a firewall. This will be used
only when configured "server type" is "Http" or
Value Range: Any valid IP address or domain name
(maximum size of 50 characters) in dot separated form.
Default Value:
This specifies the port where Proxy server is running.
Value Range: 1 - 65535
Default Value: 3128
This field along with Password is used to authenticate with
the upgrade "Http" or "Https" server.
Value Range: Accepts alphanumeric characters, hyphen,
underscore, *, #, @ (max 30 chars).
Default Value:
GLV-540 User Manual
"Https".
82