D-Link GLV-540 User Manual page 60

Network Configuration : IP Settings : PPPoE Parameters
This is used in PPPoE mode to authenticate with PPPoE
server.
User Name Value Range: Accepts alphanumeric characters, hyphen,
underscore, *, #, @ (max 30 chars)
Default Value:
This is used in PPPoE mode to authenticate with PPPoE
server
Password
Value Range: Accepts alphanumeric characters, hyphen,
underscore, *, #, @ (max 30 chars)
Default Value:
If the PPPoE session is inactive for timeout specified in this
field then the session would be terminated.
Idle Timeout Value Range: 0 to 3600 seconds
Default Value: 900 seconds
Note: When Idle Timeout is zero, the session would be active
for infinite time.
Network Configuration : Time Settings
This mode provides you the option of setting the time either
by setting manually or retrieving from the configured NTP
servers.
Mode
Value Range: <Manual> <NTP>
Default Value :<NTP>
This specifies the NTP Primary server. This is used only when
the "Mode" is selected as NTP, it can have IP address or
domain name. There are many NTP servers in the Internet
Primary like ntp1.dlink.com, ntp.dlink.com.tw, pool.ntp.org, etc.
Server Value Range: Any valid IP address or domain name (max 50
characters) in dot separated form.
Default Value: ntp1.dlink.com
This is an optional field which specifies the NTP Secondary
server. This is used only when the "Mode" is selected as NTP
and the primary server has failed. It can have IP address or
Secondary domain name.
Server
Value Range: Any valid IP address or domain name (max 50
characters) in dot separated form.
Default Value: pool.ntp.org
This is a drop down list to select the time zone where your
device is located.
Zone
Value Range: List of available Time Zones
Default Value: GMT +05:30 India, Calcutta.
In manual mode, the device time can be configured in YYYY-
MM-DD
Date & Time Seconds) format.
Value Range: Date Format as
Year:Month:Date:Hours:Min:Sec
Default Value: 2007-01-01 12:30:00
Hrs:Min:Sec (Year-Month-Date
GLV-540 User Manual
Hours: Minutes:
60