D-Link GLV-540 User Manual page 86

This is the drop down list to get the server address from
the available options.
Value Range: <Get from DHCP> <SIP Server> <Static>
Server
Default Value: <Static>
Address
Option "Get from DHCP" is only available when IP Mode is
DHCP. Option SIP server will use the SIP server address for
configuration also.
This specifies the IP address or domain name of the auto
configuration server, if Server Address is configured as
"Get from DHCP", This address would be retrieved (if
available) from the DHCP response and if it is "Static", you
IP Address can set the address.
Value Range: Any valid IP address or domain name
(maximum size of 50 characters) in dot separated form.
Default Value: 10.0.0.254
This specifies the port where the auto configuration server
is running. The default value depends on the type of
server.
Port
Value Range: 1-65535; For TFTP: 69; for HTTP / HTTPS:
80
Default Value: 69
This specifies where the Proxy server (firewall) is running;
Contact your system administrator for this information.
This will be used only with server type as "Http" or "Https"
and Setting this address, all your http / https packets will
Proxy Server
flow through this Proxy address.
Address
Value Range: Any valid IP address or domain name
(maximum size of 50 characters) in dot separated form.
Default Value:
This specifies the port where Proxy server is running.
Proxy Server
Port Value Range: 1 - 65535
Default Value: 3128
This is applicable only for the D-Link's DVX Server.
Click on this button to clear the existing DVX Server
Authentication Keys. You can clear these Keys only when
DVX Server
you are changing to another DVX Server.
Authentication
For available DVX Server, if you are clearing these Keys,
Keys
you have to clear the same Key files from the DVX Server
for this Phone account, so that the phone gets the new
authentication keys from the DVX server.
This field along with Password is used to authenticate with
the configuration upgrade "Https" server.
Server Auth
User Name Value Range: Accepts alphanumeric characters, hyphen,
underscore, *, #, @, max 30 chars.
Default Value:
This field along with User Name used to authenticate with
the configuration upgrade "Https" server.
Server Auth
Value Range: Accepts alphanumeric characters, hyphen,
Password
underscore, *, #, @, max 30 chars.
Default Value:
GLV-540 User Manual
86