Table of Contents
Advertisement
Server
Value Range: Accepts alphanumeric characters, hyphen,
Authentication
underscore, *, #, @ (max 30 chars).
Password
Default Value:
This is the software file name as released by the service
provider for software upgrade.
Software File
Name
Value Range: Valid File Name, max 35 chars.
Default Value: glv_upgrade
This is a drop down list to select the schedule at which the
software upgrade should be started; the following are the
options for software upgrade to continue.
Setting this Mode to "Once Now", will affect the IP Phone
Upgrade
to restart and at the next boot up the software upgrade
Schedule
procedure would be carried out.
Runtime setting "For Factory Reset" option may not affect
to start Software Upgrade at the next Factory Reset. This
is affective at first time when device is powered up and for
every factory reset done by Admin. For this to work, the
factory reset values when set with "For Factory Reset"
Option.
Value Range: <Once Now>, <Periodic>, <Factory Reset>
<None>
Default Value: <None>
This specifies the Interval at which software upgrade
should be started when configured for periodic upgrade.
Value Range: 1 to 365 days
Default Value: 0 days
Upgrade
Note: To start the Software Upgrade procedure, Click on
Interval
"Save" button and "Apply Changes" link. Please note that
all active calls will get disconnected and IP Phone will
restart. At the boot up it will start software upgrade
procedure?
This field along with User Name used to authenticate
with the upgrade "Http" or "Https" server.
For
Once
Now:
Immediately
Upgrade.
For Periodic: Start the software upgrade with the
configured Interval
For Factory Reset: Start the software upgrade after
factory reset
None: Don't' upgrade
GLV-540 User Manual
start
the
Software
83
Advertisement
Table of Contents
