Table of Contents
Advertisement
Call Waiting
5.2.5
Call waiting feature when enabled facilitates receiving an incoming call, while
there exists another established call. A call waiting tone is played to indicate
the arrival of the incoming call provided there is a line available to accept the
incoming call. The Line LED will blink to indicate the incoming call arrival.
Note:
Call waiting is independently configurable for each user profile.
o
An incoming call is said to be "waiting" if there exists another ongoing
o
call that is using the same user profile.
For example:
Line L1 is in call that is associated with user profile "user 2", call
waiting is enabled for this user.
Now if an incoming call arrives on line L2 for the same user profile
"user2", then a call waiting tone will be played.
If Call waiting feature is disabled and there is an incoming call for a user
profile, while there is another call using the same user profile, then the
incoming call will be processed as if the user profile is busy. I.e. the incoming
call will be rejected with a busy status or forwarded if call forward on busy is
enabled.
Note:
Call waiting does not restrict incoming call for other user profile(s)
o
A Call waiting tone will not be played for incoming calls that arrive
o
while there is another established call which is associated with some
other user profile.
For example:
Consider a user profile "user 1" with call waiting disabled.
Line L1 is in a call established using user profile "user 3"
Now if an incoming call arrives for user profile "user 1" it will be
allowed and call waiting tone will not be played.
Anonymous Call/ Caller ID Block
5.2.6
Anonymous call feature can be used to hide the Caller's identity. The Identity
of the caller will be set to anonymous.
For example: Anonymous <sip:
Upon enabling this feature, outgoing calls initiated using this user profile will
have the caller Id set to "Anonymous" or as configured in the anonymous
string.
Anonymous Call Rejection
5.2.7
Anonymous call rejection feature facilitates rejection of incoming calls that
have Anonymous Caller Id. Enabling this feature will cause rejection of
incoming calls that have the "display name" and/or "phone number" in the
Caller Id as "Anonymous".
Peer-to-Peer calls
5.2.8
Peer-to-Peer calls facilitate communication between SIP aware peer devices
such as VoIP Phones. Peer calls do not require an ITSP account to initiate and
receive calls, here the concerned entities communicate directly irrespective of
the SIP server configuration.
Anonymous@example.com
GLV-540 User Manual
>
44
Advertisement
Table of Contents
