D-Link GLV-540 User Manual page 87

This specifies the file name to be used for restoring the
configuration.
File Name Value Range: File name with the Path, max 125 chars.
Default Value: CfgBkup.zip
This is a drop down list to select the schedule at which the
configuration upgrade should be started; the following are
the options for software upgrade to continue.
Setting this Mode to "Once Now", will affect the IP Phone
Configuration to restart and at the next boot up the configuration
Schedule upgrade procedure would be carried out.
Runtime setting "For Factory Reset" option may not affect
to start Configuration Upgrade at the next Factory Reset.
This is affective at first time when device is powered up
and for every factory reset done by Admin. For this to
work, the factory reset values when set with "For Factory
Reset" Option.
Value Range: <Once Now>, <Periodic>, <Factory Reset>
<None>
Default Value: <None>
This specifies the Interval at which configuration upgrade
should be started when configured for periodic upgrade.
Value Range: 1 to 365 days
Default Value: 0
Configuration
Note: To start the configuration Upgrade procedure, Click
Interval
on "Save" button and "Apply Changes" link. Please note
that all active will get disconnected and IP Phone will
restart. At the boot up it will start configuration upgrade
procedure.
For Once Now: Immediately start configuration upgrade
on exit from configuration
For Periodic: Start the configuration upgrade with the
configured Interval
For Factory Reset: Start the configuration upgrade after
factory reset
None: Don't' upgrade
GLV-540 User Manual
87